Adjusting Copy Options
WorkCentre 7425/7428/7435
User Guide
95
Auto Suppression setting to minimize the sensitivity of the printer to variations in light background
colors.
To change this setting:
1. Touch Copy on the touch screen, then touch the Image Quality tab.
2. Touch Image Enhancement.
3. Under Background Suppression, touch Auto Suppression.
4. Touch Save.
Adjusting the Contrast
Contrast is the difference between light and dark areas in an image. To reduce or increase the contrast
of the copies:
1. Touch Copy on the touch screen, then touch the Image Quality tab.
2. Touch Image Enhancement.
3. Touch Manual Contrast.
4. Move the slider by using the up or down arrow to select more or less contrast.
5. Touch Save.
Selecting Color Effects
If you have a color original, you can adjust the copy colors using presets called Color Effects. For
example, the copy colors can be adjusted to be brighter or cooler.
To select a color effect:
1. Touch Copy on the touch screen, then touch the Image Quality tab.
2. Touch Color Effects.
3. Touch the desired color preset. The sample images displayed on the right side of the touch screen
show how the colors are adjusted.
4. Touch Off to cancel color adjustment.
5. Touch Dual Color to create a copy consisting of two colors.
a. Touch Source Color, then touch Other than Black or Color to select the source color, then
touch Save.
b. Touch Target Area Color, then touch the color to replace the source color inside the target
area, then touch Save.
c. Touch Non-Target Area, then touch the color to replace the source color outside the target
area, then touch Save.
6. Touch Single Color to create a copy in a single color selected from the list.
7. Touch Save.
To Next Page
Loading...
Need help?
General
