FEATURES
1-10
Odometer, tripmeter, instantaneous fuel
consumption and average fuel consump-
tion modes
Push the “SELECT” button to switch the dis-
play between the odometer mode “ODO”, the
tripmeter modes “TRIP 1” and “TRIP 2”, the
instantaneous fuel consumption mode “km/L”
or “L/100 km”, and the average fuel consump-
tion mode “AV_ _._ km/L” or “AV_ _._ L/100
km” in the following order:
ODO → TRIP 1 → TRIP 2 → km/L or L/100 km
→ AV_ _._ km/L or AV_ _._ L/100 km → ODO
For the UK only:
Push the “SELECT” button to switch the dis-
play between the odometer mode “ODO”, the
tripmeter modes “TRIP 1” and “TRIP 2”, the
instantaneous fuel consumption mode “km/L”,
“L/100 km” or “MPG”, and the average fuel
consumption mode “AV_ _._ km/L”, “AV_ _._ L/
100 km” or “AV_ _._ MPG” in the following
order:
ODO → TRIP 1 → TRIP 2 → km/L, L/100 km
or MPG → AV_ _._ km/L, AV_ _._ L/100 km or
AV_ _._ MPG → ODO
If the fuel level warning light comes on, the dis-
play automatically changes to the fuel reserve
tripmeter mode “TRIP F” and starts counting
the distance traveled from that point. In that
case, push the “SELECT” button to switch the
display between the various tripmeter, odome-
ter, instantaneous fuel consumption and aver-
age fuel consumption modes in the following
order:
TRIP F → km/L or L/100 km → AV_ _._ km/L
or AV_ _._ L/100 km → ODO → TRIP 1 →
TRIP 2 → TRIP F
(For the UK only)
TRIP F → km/L, L/100 km or MPG → AV_ _._
km/L, AV_ _._ L/100 km or AV_ _._ MPG →
ODO → TRIP 1 → TRIP 2 → TRIP F
To reset a tripmeter, select it by pushing the
“SELECT” button, and then push the “RESET”
button for at least one second.
If you do not reset the fuel reserve tripmeter
manually, it resets itself automatically and the
display returns to the prior mode after refueling
and traveling 5 km (3 mi).
Instantaneous fuel consumption mode
The instantaneous fuel consumption display
can be set to either “km/L”, “L/100 km” or
“MPG” (for the UK only).
• When the display is set to “km/L”, the dis-
tance that can be traveled on 1.0 L of fuel
under the current riding conditions is shown.
• When the display is set to “L/100 km”, the
amount of fuel necessary to travel 100 km
under the current riding conditions is shown.
• For the UK only: When the display is set to
“MPG”, the distance that can be traveled on
1.0 Imp.gal of fuel under the current riding
conditions is shown.
To switch between the instantaneous fuel con-
sumption displays, push the “SELECT” button
for one second when one of the displays is
shown.
If traveling at speeds under 10 km/h (6.0 mi/h),
“_ _._” is displayed.
1. Odometer/tripmeter/fuel reserve tripmeter/
instantaneous fuel consumption/average
fuel consumption
1. Instantaneous fuel consumption
To Next Page
Loading...
Need help?
General
