52 ACS550-02/U2 User’s Manual
Installation
Installation, orientation c (lifting from above)
Make the installation otherwise as described in Installation, orientation a or b on
page 39 but leave the pedestal connected to the frame.
• Remove the lead-through plate and the lower front and side plates.
• Lift the drive frame onto the lead-through plate from above.
• Fasten the drive to the floor.
• Connect the cable lugs to the terminals.
• Fasten the lower front and side plates.
• Fasten the drive by top to the wall (recommended).
To Next Page
Loading...
Need help?
General
