ABB REG650 User Manual

12.10.4 Settings
Table 283: I103IEDCMD Non group settings (basic)
Name
Values (Range) Unit Step Default Description
FunctionType 1 - 255 - 1 255 Function type (1-255)
12.11 Function commands user defined for IEC
60870-5-103 I103USRCMD
12.11.1 Functionality
I103USRCMD is a command block in control direction with user defined output
signals. These function blocks include the FunctionType parameter for each block in
the private range, and the Information number parameter for each output signal.
12.11.2 Function block
IEC10000284-1-en.vsd
I103USRCMD
BLOCK ^OUTPUT1
^OUTPUT2
^OUTPUT3
^OUTPUT4
^OUTPUT5
^OUTPUT6
^OUTPUT7
^OUTPUT8
IEC10000284 V1 EN
Figure 210: I103USRCMD function block
12.11.3 Signals
Table 284: I103USRCMD Input signals
Name
Type Default Description
BLOCK BOOLEAN 0 Block of commands
Table 285: I103USRCMD Output signals
Name
Type Description
OUTPUT1 BOOLEAN Command output 1
OUTPUT2 BOOLEAN Command output 2
OUTPUT3 BOOLEAN Command output 3
OUTPUT4 BOOLEAN Command output 4
OUTPUT5 BOOLEAN Command output 5
Table continues on next page
Section 12 1MRK 502 048-UEN A
Control
428
Technical manual

ABB REG650 Specifications

General

Brand	ABB
Model	REG650
Category	Protection Device
Language	English