ABB REG650 User Manual

comes to password, upon pressing the key, the following characters will show up:
“✳✳✳✳✳✳✳✳”. The user must scroll for every letter in the password. After all the
letters are introduced (passwords are case sensitive) choose OK and press the
key
again.
At successful Log on, the local HMI shows the new user name in the status bar at the
bottom of the LCD. If the Log on is OK, when required to change for example a
password protected setting, the local HMI returns to the actual setting folder. If the
Log on has failed, an "Error Access Denied" message opens. If a user enters an
incorrect password three times, that user will be blocked for ten minutes before a new
attempt to log in can be performed. The user will be blocked from logging in, both
from the local HMI and PCM600. However, other users are to log in during this
period.
17.13 Authority management AUTHMAN
17.13.1 Identification
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Authority management AUTHMAN - -
17.13.2 AUTHMAN
This function enables/disables the maintenance menu. It also controls the
maintenance menu log on time out.
17.13.3 Settings
Table 523: AUTHMAN Non group settings (basic)
Name
Values (Range) Unit Step Default Description
MaintMenuEnable No
Yes
- - Yes Maintenance menu enabled
AuthTimeout 10 Min
20 Min
30 Min
40 Min
50 Min
60 Min
-
- 10 Min Authority blocking timeout
1MRK 502 048-UEN A Section 17
Basic IED functions
651
Technical manual

ABB REG650 Specifications

General

Brand	ABB
Model	REG650
Category	Protection Device
Language	English