Atlas Copco Dynapac F3030C User Manual

D41 11
After starting
To increase the engine speed:
- Swivel the potentiometer (10) to increase engine speed.
There is a self-inspection (7-10 seconds) soon after the engine starts, durning
which the engine speed cannot increase and in idle speed only. After the
self-inspection, the speed can be adjusted via the potentiometer.
The engine speed is increased to the preset value.
Let the paver finisher warm up for approx. 5 minutes if the engine is cold.

Atlas Copco Dynapac F3030C Specifications

General

Brand	Atlas Copco
Model	Dynapac F3030C
Category	Construction Equipment
Language	English