Atlas Copco Dynapac F3030C User Manual

B 15
5.10 Material transfer
Type
Dual conveyor belt
Width
2 x 600 mm
Conveyors
Left and right auger separately
Drive
Hydrostatic, switch controllable
Conveying volume controller
Fully automatic via mechanical conveyor
limit switches
5.11 Material distribution F3030C
Auger diameter 430mm, 380mm
Drive
Hydrostatic central drive,
continuously controllable
Independently of the conveyor
Left and right separately driven
Conveying volume controller
Fully automatic via ultrasonic conveyor
limit switches
Auger height adjustment Mechanically infinitely variable control
Auger extension
With extension parts (see auger
extension chart)
5.12 Screed lifting device
Special functions
At standstill:
- Screed stop
- Screed stop with pretensioning
（max. pressure 50 bar）
During paving:
- Screed charging
- Screed relieving
（
max. pressure 50 bar
）
Levelling system
Mechanical grade control
Optional systems with/without slope
control

Atlas Copco Dynapac F3030C Specifications

General

Brand	Atlas Copco
Model	Dynapac F3030C
Category	Construction Equipment
Language	English