Atlas Copco Dynapac F3030C User Manual

D41 21
Loading/conveying material
- Use switch (17) to open the hopper.
Instruct the truck driver to dump the material.
- Set the switches for the auger(1)/(3) and the conveyor(22)/(25) to “manual ”.
- The auger and conveyor must switch off when the material has approximately
reached the area beneath the auger crossbeam.
- Check that the material is transferred properly.
Manually switch on or off the conveyor and the auger if the material is not
conveyed properly until a sufficient amount of material lies in front of the screed.

Atlas Copco Dynapac F3030C Specifications

General

Brand	Atlas Copco
Model	Dynapac F3030C
Category	Construction Equipment
Language	English