D11 27
2.2 Special functions
Reversible conveyor
The conveyor’s direction can be reversed in order to slightly reverse any material
which may be positioned just in front of the auger. In this case, material loses to be
avoided during transportation.
- Turn the reverse function switch (50) to “Reverse” position (Forward rotation
position is Down Arrow; Reverse position is Up Arrow).
Due to reverse function is a special function, it can only be used when material
positioned in. It is a detent button.
- When switch is in reverse function position, engage the left conveyor reverse
switch (44) or the right conveyor reverse switch (45) in MANUAL mode, then the
coorponding conveyor reverse function is activated.
If necessary, this process can be used as required to let converyor reverse to the
distance we need.
To Next Page
Loading...
Need help?
General
