F100 4
4. Cleaning
- Clean all parts coming into contact with paving material.
- Spray contaminated parts with the separator fluid spraying system (O).
Before cleaning work with the high pressure cleaner, grease all lube points acc. To
specification.
- Clean the vehicle with water after laying mineral aggregates, lean-mixed
concrete etc.
Do not spray bearing points, electrical or
electronic components with water.
- Remove residual paving material.
After cleaning work with the high pressure cleaner, grease all lube points acc. to
specification.
Danger of slipping! Ensure that all steps and
ladders are free of grease and oil!
To Next Page
Loading...
Need help?
General
