Atlas Copco Dynapac F3030C User Manual

D41 17
Driving and stopping the paver finisher
- Set the fast/slow switch (21) to "Hare".
- For driving, carefully tilt the drive lever (6) forward or backward according to the
drive direction desired.
- Use the preselector (5) and drive lever(6) to regulate the speed.
- Carry out steering movements by actuating the steering potentiometer (4).
In case of an emergency, press the emergency stop button (16)!
- To stop the vehicle, move the drive lever (6) into its centre position.

Atlas Copco Dynapac F3030C Specifications

General

Brand	Atlas Copco
Model	Dynapac F3030C
Category	Construction Equipment
Language	English