B 7
The screed's approach angle can be changed using the eccentric adjustment
facility on the crossbeam.
Depending on the paving condition requirements, the crossbeam can be moved
backwards or forwards.
This adjustment enlarges or reduces the material space between the auger and
screed.
Automatic paving stop and screed charging/relieving: When the paver finisher
stops (during a truck change), the automatic paving stop prevents the formation of
any screed marks caused by a stopped screed.
The screed relieving device puts a higher load on the traction unit, thus increasing
the traction.
Activating the screed charging device can improve the compacting result under
different paving conditions.
Central lubrication unit: The central lubrication pump fitted with a large lubricant
tank supplies grease to the various lubrication circuits through various flow
dividers. They supply lubricant to the service-sensitive points of lubrication (e.g.
bearings) at adjustable intervals.
To Next Page
Loading...
Need help?
General
