AudioCodes MediaPack MP-118 User Manual

Version 6.6 111 MP-11x & MP-124
User's Manual 11. Network
11.2.2 Multiple Interface Table Configuration Rules
The Multiple Interface table configuration must adhere to the following rules:

Each interface must have its own subnet. Configuring two interfaces with addresses in
the same subnet (e.g., 192.168.0.1/16 and 192.168.100.1/16) is invalid.

Subnets of different interfaces must not overlap (i.e. 10.0.0.1/8 and 10.50.10.1/24 is
invalid); each interface must have its own address space.

Each interface must be assigned a unique IP address (i.e., two interfaces may not
share the same address space, or even part of it).

The prefix length replaces the dotted-decimal subnet mask presentation and must
have a value of 0-30 for IPv4 addresses.

Only one OAMP interface must be configured and this must be an IPv4 address. This
OAMP interface can be combined with Media and Control.

At least one Control interface must be configured with an IPv4 address.

At least one Media interface must be configured with an IPv4 address.

The network interface types can be combined:
• Example 1:
♦ One combined OAMP-Media-Control interface with an IPv4 address
• Example 2:
♦ One OAMP interface with an IPv4 address
♦ One or more Control interfaces with IPv4 addresses
♦ One or more Media interfaces with IPv4 interfaces (with VLANs)
• Example 3:
♦ One combined OAMP-Media interface with an IPv4 address
♦ One or more combined Media-Control interfaces with IPv4 addresses.

Each network interface can be configured with a Default Gateway. The address of the
Default Gateway must be in the same subnet as the associated interface. Additional
static routing rules can be configured in the IP Routing table.

The interface name must be configured (mandatory) and unique for each interface,
and can include up to 16 characters.

For IPv4 addresses, the 'Interface Mode' column must be set to IPv4 Manual (numeric
value 10).

Each network interface must be assigned a unique VLAN ID.

When configuring more than one IP interface of the same address family, VLANs must
be enabled.

For network configuration to take effect, you must save the configuration to the
device's flash memory (burn) with a device reset.

AudioCodes MediaPack MP-118 Specifications

General

Brand	AudioCodes
Model	MediaPack MP-118
Category	Gateway
Language	English