13.2 Fax and Modem Capabilities
This section describes the device's fax and modem capabilities and corresponding
configuration. The fax and modem configuration is done in the Fax/Modem/CID Settings
page.
Notes:
• Unless otherwise specified, the configuration parameters mentioned in
this section are available on this page.
• Some SIP parameters override these fax and modem parameters. For
example, the IsFaxUsed parameter and V.152 parameters in Section
'V.152 Support' on page 154).
• For a detailed description of the parameters appearing on this page, see
'Configuration Parameters Reference' on page 421.
 To access the fax and modem parameters:
1. Open the Fax/Modem/CID Settings page (Configuration tab > VoIP menu > Media
submenu > Fax/Modem/CID Settings).
Figure 13-4: Fax/Modem/CID Settings Page
2. Configure the parameters, as required.
3. Click Submit to apply your changes.
To Next Page
Loading...
Need help?
General
