Parameter Description
Web: MWI Source Number
EMS: MWI Source Name
[MWISourceNumber]
Defines the calling party's phone number used in the Q.931
MWI Setup message to PSTN. If not configured, the channel's
phone number is used as the calling number.
[MWISubscribeIPGroupID]
Defines the IP Group ID used when subscribing to an MWI
server. The 'The SIP Group Name' field value of the IP Group
table is used as the Request-URI host name in the outgoing
MWI SIP SUBSCRIBE message. The request is sent to the IP
address defined for the Proxy Set that is associated with the IP
Group. The Proxy Set's capabilities such as proxy redundancy
and load balancing are also applied to the message.
For example, if the 'SIP Group Name' field of the IP Group is set
to "company.com", the device sends the following SUBSCRIBE
message:
SUBSCRIBE sip:company.com...
Instead of:
SUBSCRIBE sip:10.33.10.10...
Note: If this parameter is not configured, the MWI SUBSCRIBE
message is sent to the MWI server as defined by the
MWIServerIP parameter.
Digit Patterns The following digit pattern parameters apply only to voice mail applications that use
the DTMF communication method. For the available pattern syntaxes, refer to the CPE Configuration
Guide for Voice Mail.
Web: Forward on Busy Digit
Pattern (Internal)
EMS: Digit Pattern Forward On
Busy
[DigitPatternForwardOnBusy]
Defines the digit pattern used by the PBX to indicate 'call
forward on busy' when the original call is received from an
internal extension.
The valid range is a 120-character string.
Web: Forward on No Answer Digit
Pattern (Internal)
EMS: Digit Pattern Forward On No
Answer
[DigitPatternForwardOnNoAnsw
er]
Defines the digit pattern used by the PBX to indicate 'call
forward on no answer' when the original call is received from an
internal extension.
The valid range is a 120-character string.
Web: Forward on Do Not Disturb
Digit Pattern (Internal)
EMS: Digit Pattern Forward On
DND
[DigitPatternForwardOnDND]
Defines the digit pattern used by the PBX to indicate 'call
forward on do not disturb' when the original call is received from
an internal extension.
The valid range is a 120-character string.
Web: Forward on No Reason Digit
Pattern (Internal)
EMS: Digit Pattern Forward No
Reason
[DigitPatternForwardNoReason]
Defines the digit pattern used by the PBX to indicate 'call
forward with no reason' when the original call is received from
an internal extension.
The valid range is a 120-character string.
Web: Forward on Busy Digit
Pattern (External)
EMS: VM Digit Pattern On Busy
External
[DigitPatternForwardOnBusyExt]
Defines the digit pattern used by the PBX to indicate 'call
forward on busy' when the original call is received from an
external line (not an internal extension).
The valid range is a 120-character string.
To Next Page
Loading...
Need help?
General
