Notes:
 For this parameter to take effect, a device reset is required.
 When this parameter is configured, the device always loads the
cmp file after it is reset.
 The cmp file is validated before it's burned to flash. The
checksum of the cmp file is also compared to the previously
burnt checksum to avoid unnecessary resets.
 The maximum length of the URL address is 255 characters.
[IniFileURL]
Defines the name of the ini file and the path to the server (IP
address or FQDN) on which it is located. The ini file can be loaded
using HTTP/HTTPS, FTP, FTPS, or NFS.
For example:
http://192.168.0.1/filename
http://192.8.77.13/config<MAC>
https://<usern
ame>:<password>
@<IP address>/<
file name> Notes:
 For this parameter to take effect, a device reset is required.
 When using HTTP or HTTPS, the date and time of the ini file are
validated. Only more recently dated ini files are loaded.
 The optional string <MAC> is replaced with the device's MAC
address. Therefore, the device requests an ini file name that
contains its MAC address. This option allows the loading of
specific configurations for specific devices.
 The maximum length of the URL address is 99 characters.
[PrtFileURL]
Defines the name of the Prerecorded Tones (PRT) file and the path
to the server (IP address or FQDN) on which it is located.
For example: http://server_name/file, https://server_name/file.
Note: The maximum length of the URL address is 99 characters.
[CptFileURL]
Defines the name of the CPT file and the path to the server (IP
address or FQDN) on which it is located.
For example: http://server_name/file, https://server_name/file.
Note: The maximum length of the URL address is 99 characters.
[TLSRootFileUrl]
Defines the name of the TLS trusted root certificate file and the URL
from where it can be downloaded.
Note: For this parameter to take effect, a device reset is required.
[TLSCertFileUrl]
Defines the name of the TLS certificate file and the URL from where
it can be downloaded.
Note: For this parameter to take effect, a device reset is required.
[TLSPkeyFileUrl]
Defines the URL for downloading a TLS private key file using the
Automatic Update facility.
[UserInfoFileURL]
Defines the name of the User Information file and the path to the
server (IP address or FQDN) on which it is located.
For example: http://server_name/file, https://server_name/file
Note: The maximum length of the URL address is 99 characters.
To Next Page
Loading...
Need help?
General
