12.8
Removing and installing starter
motor
e Caution:
Disconnect earth (ground) lead from battery.
Insulate earth (ground) lead.
•
Release starter motor cover (1).
•
Remove the cover.
•
Detach lead (2).
•
Release starter motor retainer (3).
•
Remove the starter motor.
•
Install by following the above work instructions in
the reverse order.
X Tightening torque:
Starter motor to engine ................................ 20 Nm
Starter motor cover to gearbox housing ......... 7 Nm
Positive lead to starter motor ....................... 10 Nm
C120020
1
3
2
To Next Page
Loading...
Need help?
General
