33.3
33
Technical data R850 C R 1200 C
Rear wheel drive
Gear tooth pattern Klingelnberg-Palloid spiral bevel
Gear ratios 2.75 : 1 2.54 : 1
Number of teeth 33 : 12 33 : 13
Backlash mm (in) 0.07...0.16 (0.0027..0.0063)
Taper roller bearing preload mm (in) 0.05...0.1 (0.0020...0.0039)
Oil grades Brand-name hypoid gear oil, SAE 90 GL 5
Filling capacity Initial filling
l (Imp. pint/
US quart)
up to lower edge of thread in oil filler hole
app. 0.20 (0.35/0.21)
During oil changes
l (Imp. pint/
US quart)
up to lower edge of thread in oil filler hole
app. 0.18 (0.32/0.19)
Drive shaft
Layout Two-piece shaft with universal joints at each end,
central sliding joint and integral torsonal vibration
damper, enclosed in swinging arm
Swinging arm
Swinging arm length mm (in) 611.75 (24.09) (from arm pivot point to centre of
rear axle)
Rear suspension
Suspension strut Coil spring and single-tube, gas-filled shock
absorber with seven spring preload settings
Suspension travel mm (in) 100 (3.94)
To Next Page
Loading...
Need help?
General
