11.62
Installing alternator
•
Install alternator.
Poly-V belt adjusting procedure:
Poly-V belt installation procedure:
•
Screw hex nut (1) on adjusting screw (2) up
handtight (no tools to be used)
•
Tighten adjusting screw (2) with a torque wrench,
fully tighten retaining nut (3), slacken adjusting
screw and tighten screws fully.
X Tightening torque:
Pre-tension Poly-V belt
with adjusting screw....................................... 8 Nm
Alternator to alternator support cover........... 20 Nm
•
Install front cover.
RS110480
2
3
1
RS110490
To Next Page
Loading...
Need help?
General
