36.8
Removing/installing rear wheel
•
Place the motorcycle on the auxiliary stand,
BMW No. 00 1 550.
e Caution:
Only use wheel studs with length code 60.
Do not oil or grease wheel studs!
Contact faces on rear wheel drive and hub must be
clean and free of grease.
X Tightening torque:
Screw in wheel studs handtight, then
tighten them in a crosswise pattern
Initial tightening ............................................ 50 Nm
Final tightening........................................... 105 Nm
00 1 550
C360010
To Next Page
Loading...
Need help?
General
