7 - 6 AUTO DIAL NUMBERS AND DIALING OPTIONS
Broadcasting (Not available for colour faxes)
Broadcasting is when the same fax message is automatically sent to
more than one fax number. Using the
Menu/Set
key, you can
include Groups, Speed Dial numbers and up to 50 manually dialed
numbers. If you did not use up all the numbers for Groups, access
codes or credit card numbers, you can 'broadcast' faxes to up to 150
different numbers. However, the available memory will vary
depending on the types of jobs in the memory and the number of
locations used for broadcasting. If you broadcast to more than the
maximum numbers available, you will not be able to use Dual Access
and the Timer.
To include Speed Dial numbers and manually dialed numbers in the
same broadcast, you must press
Menu/Set
between each of the
numbers. Use
Search/Speed Dial
to help you choose the numbers
easily. (See Setting up Groups for Broadcasting on page 7-2.)
After the broadcast is finished, a Broadcast Report will be printed to
let you know the results.
■
Enter the long dialing sequence numbers as you would normally, but
remember that each Speed Dial number counts as one number, so the
number of locations you can store becomes limited.
■ If the line is busy a connection cannot be made so the machine
will redial the number.
■ If the memory is full, press
Stop/Exit
to stop the job or if more
than one page has been scanned, press
Fax Start
to send the
portion that is in the memory.
To Next Page
Loading...
Need help?
General
