6 - 11 SETUP SEND
Real Time Transmission
When you are sending a fax, the machine will scan the documents
into the memory before sending. Then, as soon as the phone line is
free, the machine will start dialing and sending.
If the memory becomes full, the machine will send the document in
real time (even if REAL TIME TX is set to OFF).
Sometimes, you may want to send an important document
immediately, without waiting for memory transmission.
You can set REAL TIME TX to ON.
1
Place the document face up in the ADF, or face down on the
scanner glass.
2
Press
Menu/Set
,
2
,
2
,
5
.
3
To change the default setting, press
or to select ON (or OFF).
Press
Menu/Set
.
Go to Step 5.
—OR—
For the next fax transmission only, press or to select
NEXT FAX ONLY.
Press
Menu/Set
.
4
Press or to select ON (or OFF).
Press
Menu/Set
.
SETUP SEND
5.REAL TIME TX
To Next Page
Loading...
Need help?
General
