11 - 20 WALK-UP PHOTOCAPTURE CENTER
™
Understanding the Error Messages
Once you are familiar with the types of errors that can occur while
you're using the PhotoCapture Center
™
, you can easily identify and
troubleshoot any difficulties.
When an error message appears on the LCD, the machine will beep
to get your attention.
MEDIA ERROR—This message will appear if you insert a media card
that is either bad or not formatted, or when there is a problem with
the media drive, or if the DPOF print file on the media card tried to
select a .JPG image that is not there. To clear this error, take out the
media card.
NO FILE—This message will appear if you select PHOTOCAPTURE
and the media card in the drive (slot) does not contain a .JPG file.
OUT OF MEMORY—This message will appear if you are working with
images that are too large for the machine's memory.
PhotoCapture Center
™
Requirements
To avoid error conditions, please remember:
■ The DPOF file on the media card must be in a valid format.
■ The image file extension must be .JPG (Other image file
extensions .JPEG, .TIF, .GIF and so on will not be recognized).
■ Walk-up PhotoCapture Center
™
printing must be performed
separately from PhotoCapture Center
™
operations using the PC.
(Simultaneous operation is not available.)
When printing the INDEX or IMAGE, the PhotoCapture Center
™
will print all the valid images, even if one or more images has
been corrupted. A portion of the corrupted image may be
printed.
To Next Page
Loading...
Need help?
General
