14 - 8
USING THE BROTHER CONTROL CENTER
To access the scanner Configurations screen
1
Place the document face up in the ADF. The Brother Control
Center screen will pop up.
2
Right-click the appropriate Control Center button to display
Configurations and then click on it. Click the Modify Settings
button. The configuration screen for the Control Center button
will appear.
3
To save your settings, click the OK button
—OR—
To go back to the factory default settings, click the
Restore Defaults button.
Perform an operation from the Control Center
screen
If you see this screen it means you left-clicked a button in the Control
Center window without first placing a document in the ADF.
Place the document in the machine ADF and then click OK to go to
the Control Center screen.
If you want to scan the document from the scanner glass, please
use the
Scan to
key on the control panel of the machine.
To Next Page
Loading...
Need help?
General
