10 - 10 MAKING COPIES
Paper Type
You can change the paper type only for the next copy. (You can
change the default setting in the function menu 1-1. See Setting the
Paper Type on page 4-1.) Select the type of media that you are using
to get the best print quality.
1
Place the document face up in the ADF, or face down on the
scanner glass.
2
Use the dial pad to enter the number of copies you want (up to
99).
3
Press
Options
and or to select PAPER TYPE.
Press
Menu/Set
.
4
Press or to select the type of paper you are using
(PLAIN, INK JET, GLOSSY or TRANSPARENCY).
Press
Menu/Set
.
5
If you selected GLOSSY, press or to select
GLOSSY:4-COLOUR or GLOSSY:3-COLOUR.
Press
Menu/Set
.
6
Press
Mono Copy
or
Colour Copy
.
—OR—
Press or for more settings.
The print quality of black ink depends on the type of glossy
paper you are using. Black ink is used when you select
GLOSSY:4-COLOUR. If the glossy paper you are using repels
the black ink, select GLOSSY:3-COLOUR, which simulates black
ink by combining the three ink colours.
To Next Page
Loading...
Need help?
General
