5 - 9 SETUP RECEIVE
Reception into memory (Not available for colour
fax reception)
As soon as the multi-purpose sheet feeder becomes empty during
fax reception, the screen will display CHECK PAPER; please put
some paper in the multi-purpose sheet feeder. (See Quick Setup
Guide.)
If the MEMORY RECEPTION switch is ON at this time…
The current fax reception will continue, with the remaining page(s)
being stored in memory, subject to available memory. Subsequent
incoming faxes will also be stored into memory until the memory is
full, following with no further incoming fax calls will be automatically
answered. To print all data put fresh paper in the multi-purpose sheet
feeder and press
Fax Start
.
If the MEMORY RECEPTION switch is OFF at this time…
The current fax reception will continue, with the remaining page(s)
being stored in memory, subject to available memory. Subsequent
incoming fax calls will not be automatically answered until fresh
paper is put in the multi-purpose sheet feeder. To print the last fax
received, put paper in the multi-purpose sheet feeder and press
Fax Start
.
1
Press
Menu/Set
,
2
,
1
,
6
.
2
Use or to select ON (or
OFF).
Press
Menu/Set
.
3
Press
Stop/Exit
.
SETUP RECEIVE
6.MEMORY RECEIVE
To Next Page
Loading...
Need help?
General
