REMOTE RETRIEVAL ACCESS CARD R - 1
Remote Retrieval Access Card
If you plan to receive fax messages while away from the machine,
carrying the Remote Retrieval Access Card printed below will serve
as a convenient reminder of the retrieval procedures. Simply cut out
the card and fold it to fit your wallet or organizer. Keeping it handy will
help you derive the full benefit of the machine's forwarding, paging
and remote retrieval features.
Using Remote Retrieval Access Code
1
Dial your fax number from a fax machine using touch tone.
2
When the machine answers, immediately enter your
Remote Retrieval Access Code (159 ).
3
The machine signals the kinds of messages received:
1 long beep — Fax message(s)
No beeps — No messages.
4
After 2 short beeps, enter a command.
5
Press
9 0
to reset the machine when you finish.
6
Hang up.
1
4
Press
9 7 1
1 long beep — Fax message(s)
3 short beeps — No messages
CHANGE ANSWER MODE
Press
9 8
then for EXTERNAL TAD, press
1
.
FAX/TEL, press
2
.
FAX ONLY, press
3
.
EXIT REMOTE OPERATION
Press
9 0
.
CHECK RECEIVING STATUS
REMOTE RETRIEVAL ACCESS CARD
Fold Fold
To Next Page
Loading...
Need help?
General
