INTRODUCTION 1 - 5
Turning the MFC on and off
When the MFC is idle, you can turn it on and off by pressing the
ON/OFF
key. In OFF mode, the MFC will send delayed faxes that
have been set up and can still receive faxes in FAX ONLY mode. You
can even retrieve faxes using remote retrieval if you are away from
your MFC. If you want to do other operations, you must turn the
machine back on.
Turning the MFC off
Press and hold down the
ON/OFF
key
until the LCD shows:
The LCD and scanner light will go off.
Turning the MFC on
Press and hold down the
ON/OFF
key
until the LCD shows:
The LCD will show the date and time
(standby mode).
Turning Off the Scanner Lamp
The scanner lamp stays on for 16 hours before switching off to
preserve the life of the lamp. You can turn off the scanner lamp
manually if you wish by pressing the and keys simultaneously.
The scanner lamp will remain turned off until the next time you use
the scanning feature.
Turning off the scanner lamp will also reduce the power
consumption.
Even if you turned the MFC off, it will periodically clean the print
head to preserve print quality.
If you unplug the AC power cord, no MFC operations will be
available.
Please note that turning the lamp off regularly will reduce the
lamps life.
SHUTTING DOWN
PLAIN 01
PLEASE WAIT
To Next Page
Loading...
Need help?
General
