INITIAL SETUP 4 - 7
PABX and TRANSFER
The machine is initially set to be connected with PSTN (Public
Switched Telephone Network) lines. However, many offices use a
central telephone system or Private Automatic Branch Exchange
(PABX). Your fax can be connected to most types of PABX. The
recall facility on the machine supports timed break recall only (TBR),
PBXS normally can work with this for gaining access to an outside
line, or for transferring a call to another extension: The feature works
when the
Tel/R
key is pressed.
Setting PABX
If the machine is connected to a PABX system, set PBX to ON. If not,
set OFF.
1
Press
Menu/Set
,
1
,
5
.
2
Press or to select ON (or
OFF).
Press
Menu/Set
.
3
Press
Stop/Exit
.
You can program a
Tel/R
keypress as part of a number stored
in a Speed Dial location. When programming the Speed dial
number (Function menu 2-3-1) press
Tel/R
first (the screen
displays "!"), then enter the telephone number. If you do this,
you do not need to press
Tel/R
each time before you dial using
a Speed Dial location. (See Storing numbers for easy dialing on
page 7-1.)
However, if PBX is set to OFF, you can't use the Speed Dial
number that a
Tel/R
keypress is programmed into.
GENERAL SETUP
5.PBX
To Next Page
Loading...
Need help?
General
