5 - 15 SETUP RECEIVE
Using TX Lock
You must use a password to switch TX Lock ON and OFF.
Setting Up the TX Lock for the First Time
1
Press
Menu/Set
,
2
,
0
,
1
.
2
Enter a 4-digit number as a new
password.
3
Press
Menu/Set
.
The screen prompts you to re-enter
the password.
4
Re-enter the password and press
Menu/Set
.
5
Press or to choose SET TX LOCK.
6
Press
Menu/Set
. The screen
prompts you to enter the password.
7
Enter a 4-digit password, followed
by
Menu/Set
.
This is the same as the security password of the machine
already stored.
The screen displays ACCEPTED for 2 seconds, followed by
TX LOCK MODE - TX Lock is now switched ON.
If the password you enter at Step 7 is incorrect, the screen
would display WRONG PASSWORD. After 2 seconds the display
will then return to normal (displaying the date & time). You must
then switch ON TX Lock again. (See Switching TX Lock ON on
page 5-16.)
MISCELLANEOUS
1.TX LOCK
TX LOCK
NEW PASSWD:XXXX
TX LOCK
VERIFY:XXXX
TX LOCK
PASSWORD:XXXX
To Next Page
Loading...
Need help?
General
