5 - 3 SETUP RECEIVE
Setting the F/T Ring Time (F/T mode only)
If you set the Receive Mode to F/T, you'll need to decide how long
the machine will signal you with its special pseudo/double-ring when
you have a voice call. (If it's a fax call, the machine prints the fax.)
This ringing happens after the initial ringing from the phone
company. Only the fax machine rings (for 20, 30, 40 or 70 seconds)
and no other phones on the same line will ring with the special
pseudo/double-ring. However, you can answer the call on any
extension phone (in a separate wall jack/phone socket) on the same
line as the machine. (See Operation from extension telephones on
page 5-6.)
1
Press
Menu/Set
,
2
,
1
,
2
.
2
Press or to select how long
the machine will ring to alert you that
you have a voice call.
Press
Menu/Set
.
3
Press
Stop/Exit
.
Even if the caller hangs up during the pseudo/double-ringing,
the machine will continue to ring for the set time.
SETUP RECEIVE
2.F/T RING TIME
To Next Page
Loading...
Need help?
General
