REMOTE FAX OPTIONS 8 - 5
Remote commands
Follow the commands below to access features when you are away
from the machine. When you call the machine and enter your
Remote Access Code (159 ), the system will give you two short
beeps and you must enter a remote command.
Remote commands Operation details
95 Change the Fax Forwarding
settings
1 OFF If you hear one long beep, the change has
been accepted. If you hear three short
beeps, you cannot change it because the
conditions have not been met. You can
register your Fax Forwarding number by
entering 4. (See Changing your Fax
Forwarding number on page 8-7.) Once you
have registered the number, the machine
will change FAX FORWARD to ON mode.
2 Fax Forwarding
4 Fax Forwarding number
6 Fax Storage ON You can turn FAX STORAGE to ON or OFF.
(You can turn off the Fax Storage only if
there are no faxes stored in the memory, or
if all faxes have been erased using Remote
Command 963.)
7 Fax Storage OFF
96 Retrieve a fax
2 Retrieve all faxes Enter the number of a remote fax machine to
receive stored fax message(s). (See
Retrieving fax messages on page 8-7.)
3 Erase faxes from the
memory
If you hear one long beep, you can erase fax
messages from the memory.
To Next Page
Loading...
Need help?
General
