INITIAL SETUP 4 - 3
Setting the Station ID
You should store your name or company name and fax and
telephone number to be printed on all fax pages that you send.
1
Press
Menu/Set
,
1
,
3
.
2
Enter your fax number (up to 20
digits).
Press
Menu/Set
.
You must enter a fax number to continue (up to 20 digits).
3
Enter your telephone number (up to
20 digits).
Press
Menu/Set
.
(If your telephone number and fax number are the same, enter
the same number again.)
4
Use the dial pad to enter your name
(up to 20 characters).
Press
Menu/Set
.
(See Entering text on page 4-4.)
5
Press
Stop/Exit
.
The LCD will show the date and time.
The telephone number you enter is only used for Cover Page
features. (See Composing the electronic Cover Page on page
6-14.)
If the Station ID has already been programmed, the LCD will ask
you to press
1
to make a change or
2
to exit without changing.
GENERAL SETUP
3.STATION ID
STATION ID
FAX:
STATION ID
TEL:
STATION ID
NAME:
To Next Page
Loading...
Need help?
General
