10 - 4 MAKING COPIES
Out of memory message
If the memory becomes full while you are
making copies, the LCD will show this
message:
If the OUT OF MEMORY message appears while you are scanning the
first page of your document, press
Stop/Exit
to cancel. You will
need to clear some jobs from the memory before you can continue.
If you were scanning a subsequent page, press
Mono Copy
or
Colour Copy
to print the scanned pages or press
Stop/Exit
to
cancel.
When you get an OUT OF MEMORY message, you may be able to
make copies if you first print incoming faxes in memory and restore
the memory to 100%.
To gain extra memory, you can turn off Fax Storage. (See Setting
Fax Storage on page 8-2.)
—
OR
—
Print the faxes that are in the memory. (See Printing a fax from the
memory on page 5-10.)
OUT OF MEMORY
PLAIN 01
To Next Page
Loading...
Need help?
General
