Dell PowerVault User Manual

Start Enclosure Blink
Stop Enclosure Blink
Host Topology Commands
Create Host
Create Host Group
Create Host Port
Create iSCSI Initiator
Delete Host
Delete Host Group
Delete Host Port
Delete iSCSI Initiator
Set Host
Set Host Group
Set Host Channel
Set Host Port
Set iSCSI Initiator
Set iSCSI Target Properties
Show Host Ports
iSCSI Commands
Create iSCSI Initiator
Delete iSCSI Initiator
Reset Storage Array iSCSI Baseline
Save Storage Array iSCSI Statistics
Set iSCSI Initiator
Set iSCSI Target Properties
Show Current iSCSI Sessions
Show Storage Array Negotiation Defaults
Start iSCSI DHCP Refresh
Stop Storage Array iSCSI Session
Physical Disk Commands
Clear Physical Disk Port Statistics
Download Physical Disk Firmware
Replace Physical Disk
Revive Physical Disk
Save Physical Disk Channel Fault Isolation Diagnostic Status
Save Physical Disk Log
Set Virtual Disk
Set Foreign Physical Disk to Native
126

Dell PowerVault Specifications

General

RAID Levels	0, 1, 5, 6, 10, 50, 60
RAID Support	Yes
Drive Type	SAS, SSD
Interface	SAS, Fibre Channel, iSCSI
Category	Storage
Connectivity	Ethernet, Fibre Channel
Scalability	Yes
Operating System Compatibility	Windows, Linux, VMware
Management Software	PowerVault Manager, OpenManage