Dell PowerVault User Manual

Parameter Description
prevent saving the host topology, set this
parameter to FALSE. The default value is FALSE.
lunMappings
Saves the LUN mapping to the file. To save the
LUN mapping, set this parameter to TRUE. To
prevent saving the LUN mapping, set this
parameter to FALSE. The default value is FALSE.
NOTE: When you use this command, you can specify any combination of the parameters for global
setting, virtual disk configuration setting, host topology, or LUN mapping. To enter all settings, use
the allConfig parameter. The parameters are optional; you do not have to enter any parameters.
Save Storage Array Core Dump
Description
This command saves a core dump to a specified file on a host.
Syntax
save storageArray coreDump file="filename"
Parameter
Parameter Description
file
The file path and the file name to which you save
the core dump. Enclose the file name in double
quotation marks (" "). For example: file="C:
\Array Backups\DBMbackup_03302010.core"
Save Storage Array DBM Database
Description
This command saves the database management (DBM) of the storage array.
Syntax
save storageArray dbmDatabase
[sourceLocation=(disk | onboard) |
controller [(0|1)] |
contentType=(raidConfigration | all)]
file="fileName"
260

Dell PowerVault Specifications

General

RAID Levels	0, 1, 5, 6, 10, 50, 60
RAID Support	Yes
Drive Type	SAS, SSD
Interface	SAS, Fibre Channel, iSCSI
Category	Storage
Connectivity	Ethernet, Fibre Channel
Scalability	Yes
Operating System Compatibility	Windows, Linux, VMware
Management Software	PowerVault Manager, OpenManage