Dell PowerVault User Manual

Stop Disk Pool Locate
Description
This command turns off the indicator lights on the physical disks that were turned on by the start
diskPool locate command.
Syntax
stop diskPool locate
Stop Enclosure Blink
Description
This command turns off the indicator LED on the enclosure that was turned on by the start
enclosure blink
command.
Syntax
stop enclosure blink
Parameters
None.
Stop Pending Snapshot Images On Consistency Group
Description
This command stops all of the pending snapshot images that are to be created on a snapshot
consistency group. If the snapshot consistency group does not have any pending snapshot images, the
MD storage management software displays an error message and does not run the command.
Syntax
stop consistencyGroup [consistencyGroupName] pendingSnapImageCreation
Parameter
Parameter Description
consistencyGroupName
The name of the consistency group for which you
want to stop any pending snapshot operation.
Enclose the name of the consistency group in
square brackets ([ ]).
372

Dell PowerVault Specifications

General

RAID Levels	0, 1, 5, 6, 10, 50, 60
RAID Support	Yes
Drive Type	SAS, SSD
Interface	SAS, Fibre Channel, iSCSI
Category	Storage
Connectivity	Ethernet, Fibre Channel
Scalability	Yes
Operating System Compatibility	Windows, Linux, VMware
Management Software	PowerVault Manager, OpenManage