Dell PowerVault User Manual

Remove Virtual Disk Copy
Description
This command removes a virtual disk copy pair.
Syntax
remove virtualDiskCopy target [targetName]
[source [sourceName]]
copyType=(online | offline)
Parameters
Parameter Description
target
Name of the target virtual disk to remove. You
must put brackets ([ ]) around the target virtual disk
name. If the target virtual disk name has special
characters, you must also put quotation marks (" ")
around the target virtual disk name.
source
Name of the source virtual disk to remove. You
must put brackets ([ ]) around the source virtual
disk name. If the source virtual disk name has
special characters, you must also put quotation
marks (" ") around the source virtual disk name.
copyType
Identifies a virtual disk copy with a snapshot. If the
virtual disk copy has an online copy snapshot, set
this parameter to online. If the virtual disk copy
does not have a snapshot, set this parameter to
offline.
Remove Virtual Disk From Remote Replication Group
Description
This command removes a member virtual disk from an existing remote replication group. Optionally, you
can delete the repository virtual disk members from the remote replication group.
This command is valid only on the local storage array that contains the remote replication group whose
member virtual disk that you want to remove.
Syntax
remove virtualDisk ["virtualDiskName"]
asyncRemoteReplicationGroup="asyncRemoteReplicationGroupName"
[deleteRepositoryMembers=(TRUE | FALSE)]
237

Dell PowerVault Specifications

General

RAID Levels	0, 1, 5, 6, 10, 50, 60
RAID Support	Yes
Drive Type	SAS, SSD
Interface	SAS, Fibre Channel, iSCSI
Category	Storage
Connectivity	Ethernet, Fibre Channel
Scalability	Yes
Operating System Compatibility	Windows, Linux, VMware
Management Software	PowerVault Manager, OpenManage