Syntax
stop snapVirtualDisk ["snapVirtualDiskName"]
Parameter
Parameter Description
snapVirtualDisk
The alphanumeric identifier (including - and _) of
the snapshot virtual disk that you want to stop.
Enclose the snapshot virtual disk identifier in
double quotation marks (" ") inside square brackets
([ ]).
Stop SSD Cache Performance Modeling
Description
This command stops the performance modeling operation and displays the performance modeling data
for the SSD cache. Before running this command, you must start the performance modeling operation
with the start ssdCache performanceModeling command. Optionally, you can save the data to a
file.
Syntax
stop ssdCache [ssdCacheName] performanceModeling [file="filename"]
Parameters
Parameter Description
ssdCache
The alphanumeric identifier (including - and _) of
the SSD cache that you want to locate. Enclose the
identifier in square brackets ([ ]). If the SSD cache
name contains special characters or consists only
of numbers, you also must enclose the identifier in
double quotation marks (" ") inside square brackets.
file
The file path and the file name to which you want
to save the performance modeling data. Enclose
the file name in double quotation marks (" "). For
example: file="C:\Program Files\CLI\logs
\performance.csv".
The default name of the file that contains the
performance modeling data is readLinkStatus.csv.
You can use any file name, but you must use
the .csv extension.
379
To Next Page
Loading...
Need help?
General
