Download Storage Array NVSRAM
Description
This command downloads NVSRAM values for the storage array RAID controller module.
Syntax
download storageArray NVSRAM file="filename"
[healthCheckMelOverride=(TRUE | FALSE)]
Parameter
Parameter Description
file The file path and the file name that contains the
NVSRAM values. Enclose the NVSRAM file name in
double quotation marks (" "). For example:
file="C:\Program Files\CLI\dnld
\afrm.dlp"
Valid file names have a .dlp extension.
healthCheckMelOverride The setting to override the results of the health
check of the major event log (MEL). MEL validation
still occurs, it is not bypassed. If the MEL check
fails, you can bypass the failure by using this
parameter when running the command.
Before any download, the RAID controller module
checks the event log to determine if an event has
occurred that might prevent the new NVSRAM
from successfully downloading. If such an event
has occurred, the controller will normally not
download new NVSRAM.
This parameter forces the controller to download
new NVSRAM. The default value is FALSE. Set this
value to TRUE if you want to force the controller to
download new NVSRAM.
Enable Disk Group Security
Description
This command converts a non-secure disk group to a secure disk group.
Syntax
enable diskGroup [diskGroupName] security
220
To Next Page
Loading...
Need help?
General
