Dell PowerVault User Manual

Remove Member Virtual Disk From Consistency Group
Description
This command removes a member virtual disk from a an existing snapshot consistency group. Optionally,
you can delete the repository virtual disk members from the consistency group.
Syntax
set consistencyGroup ["consistencyGroupName"]
removeCGMemberVirtualDisk=memberName
[deleteRepositoryMembers=(TRUE | FALSE)]
Parameters
Parameter Description
consistencyGroupName
The name of the consistency group from which
you want to remove a member. Enclose the
consistency group name in double quotation
marks (" ") inside square brackets ([ ]).
memberName
The name of the member virtual disk that you want
to remove.
deleteRepositoryMembers
Determines whether to remove all of the
repository members from the consistency group.
Remove Physical Disks From SSD Cache
Description
This command decreases the capacity of the SSD cache by removing Solid State Disks (SSDs).
Syntax
set ssdCache [ssdCacheName]
removePhysicalDisks=(enclosureID1,drawerID1,slotID1 ...
enclosureIDn,drawerIDn,slotIDn
)
Parameters
Parameter Description
ssdCache
The alphanumeric identifier (including - and _) of
the SSD cache from which you want to remove
SSDs. Enclose the identifier in square brackets ([ ]).
If the SSD cache name contains special characters
or consists only of numbers, you also must enclose
235

Dell PowerVault Specifications

General

RAID Levels	0, 1, 5, 6, 10, 50, 60
RAID Support	Yes
Drive Type	SAS, SSD
Interface	SAS, Fibre Channel, iSCSI
Category	Storage
Connectivity	Ethernet, Fibre Channel
Scalability	Yes
Operating System Compatibility	Windows, Linux, VMware
Management Software	PowerVault Manager, OpenManage