Dell PowerVault User Manual

Show Virtual Disk Copy Target Candidates
Description
This command returns information about the candidate virtual disks that you can use as the target for a
virtual disk copy operation.
Syntax
show virtualDiskCopy source ["sourceName"] targetCandidates
Parameters
Parameter Description
source
Name of the source virtual disk for which you are
trying to find a candidate target virtual disk. You
must put quotation marks (" ") and brackets ([ ])
around the source virtual disk name. The source
virtual disk name and quotation marks must be
inside the brackets.
Show Virtual Disk Performance Statistics
Description
This command returns information about the performance of the virtual disks in a storage array.
Syntax
show (allVirtualDisks | virtualDisk [virtualDiskName]
virtualDisks [virtualDiskName1... virtualDiskNameN]) performanceStats
Parameters
Parameter Description
allvirtualDisks
The setting to return performance statistics about
all of the virtual disks in the storage array.
virtualDisk or virtualDisks
Name of the source virtual disk for which you are
trying to find a candidate target virtual disk. You
must put quotation marks (" ") and brackets ([ ])
around the source virtual disk name. The source
virtual disk name and quotation marks must be
inside the brackets.
Show Virtual Disk Reservations
Description
This command returns information about the virtual disks that have persistent reservations.
353

Dell PowerVault Specifications

General

RAID Levels	0, 1, 5, 6, 10, 50, 60
RAID Support	Yes
Drive Type	SAS, SSD
Interface	SAS, Fibre Channel, iSCSI
Category	Storage
Connectivity	Ethernet, Fibre Channel
Scalability	Yes
Operating System Compatibility	Windows, Linux, VMware
Management Software	PowerVault Manager, OpenManage