Dell PowerVault User Manual

Parameters
Parameter Description
snapGroup
The alphanumeric identifier (including - and _) of
the snapshot group for which you want to stop
pending snapshot images. Enclose the snapshot
group identifier in square brackets ([ []).
consistencyGroup
The alphanumeric identifier (including - and _) of
the snapshot consistency group for which you
want to stop pending snapshot images. Enclose
the snapshot group identifier in square brackets
([ []).
Stop Snapshot (Legacy)
Description
This command stops a copy-on-write operation.
Syntax
stop snapshot (virtualDisk [virtualDiskName] |
virtualDisks [virtualDiskName1... virtualDiskNameN])
Parameters
Parameter Description
virtualDisk or virtualDisks The name of the specific virtual disk for which you
want to stop a copy-on-write operation. You can
enter more than one virtual disk name.
Enclose the virtual disk names using one of these
forms:
• On a Windows command line:
\"virtualDiskName\"
• In a Windows script engine window:
["virtualDiskName"]
• On a Linux command line:
\"virtualDiskName\"
• In a Linux script engine window:
[\"virtualDiskName\"]
Notes
Names can be any combination of alphanumeric characters, underscore (_), hyphen (-), and pound (#).
Names can have a maximum of 30 characters.
One technique for naming the snapshot (legacy) virtual disk and the snapshot (legacy) repository virtual
disk is to add a hyphenated suffix to the original base virtual disk name. The suffix distinguishes between
375

Dell PowerVault Specifications

General

RAID Levels	0, 1, 5, 6, 10, 50, 60
RAID Support	Yes
Drive Type	SAS, SSD
Interface	SAS, Fibre Channel, iSCSI
Category	Storage
Connectivity	Ethernet, Fibre Channel
Scalability	Yes
Operating System Compatibility	Windows, Linux, VMware
Management Software	PowerVault Manager, OpenManage