Dell PowerVault User Manual

Syntax
show virtualDiskCopy (allVirtualDisks |
source ["
sourceName"] |
target ["targetName"])
Parameters
Parameter Description
allVirtualDisks
Returns information about virtual disk copy
operations for all virtual disk copy pairs.
source
Name of the source virtual disk about which to
retrieve information. You must put quotation marks
(" ") and brackets ([ ]) around the source virtual disk
name. The source virtual disk name and quotation
marks must be inside the brackets.
target
Name of the target virtual disk about which to
retrieve information. You must put quotation marks
(" ") and brackets ([ ]) around the target virtual disk
name. The target virtual disk name and quotation
marks must be inside the brackets.
Show Virtual Disk Copy Source Candidates
Description
This command returns information about the candidate virtual disks that you can use as the source for a
virtual disk copy operation.
Syntax
show virtualDiskCopy sourceCandidates
Parameters
None.
Additional Information
This command returns virtual disk copy source information as shown in this example.
Virtual Disk Name: finance
Capacity: 4.0 GB
Disk Group: 1
Virtual Disk Name: engineering
Capacity: 4.0 GB
Disk Group: 2
352

Dell PowerVault Specifications

General

RAID Levels	0, 1, 5, 6, 10, 50, 60
RAID Support	Yes
Drive Type	SAS, SSD
Interface	SAS, Fibre Channel, iSCSI
Category	Storage
Connectivity	Ethernet, Fibre Channel
Scalability	Yes
Operating System Compatibility	Windows, Linux, VMware
Management Software	PowerVault Manager, OpenManage