Dell PowerVault User Manual

NOTE: This command must be run from the command line. It cannot be run in the MD Storage
Manager script editor.
Syntax
supportBundle auto show
Parameters
None.
Display Support Bundle Collection Schedule
Description
This command displays the schedule for collecting support bundles for all storage arrays.
NOTE: This command must be run from the command line. It cannot be run in the MD Storage
Manager script editor.
Syntax
supportBundle schedule show
Parameters
None.
Download Enclosure Management Module Firmware
Description
This command downloads firmware for the enclosure management module.
Syntax
download (allEnclosures | enclosure [enclosureID])
firmware file="filename"
Parameters
Parameter Description
enclosure
Identifies the enclosure to which to load new
firmware. Enclosure ID values are 0 to 99.
You must put brackets ([ ]) around the enclosure ID
value.
You can use the following parameters:
• The allEnclosures parameter, which
downloads new firmware to all of the EMMs in
the storage array
216

Dell PowerVault Specifications

General

RAID Levels	0, 1, 5, 6, 10, 50, 60
RAID Support	Yes
Drive Type	SAS, SSD
Interface	SAS, Fibre Channel, iSCSI
Category	Storage
Connectivity	Ethernet, Fibre Channel
Scalability	Yes
Operating System Compatibility	Windows, Linux, VMware
Management Software	PowerVault Manager, OpenManage