Dell PowerVault User Manual

Syntax
show storageArray dbmDatabase
Parameters
None.
Show Storage Array Host Topology
Description
This command returns the storage partition topology, the host type labels, and the host type index for the
host storage array.
Syntax
show storageArray hostTopology
Parameters
None.
Show Storage Array LUN Mappings
Description
This command returns information from the storage array profile about the storage array LUN mappings.
If you run this command with no parameters, this command returns all LUN mappings.
Syntax
show storageArray lunMappings [host ["hostName"] |
hostgroup ["hostGroupName"]]
Parameters
Parameter Description
host
Name of a specific host for which to see the LUN
mappings. You must put quotation marks (" ") and
brackets ([ ]) around the host name. The host name
and quotation marks must be inside the brackets.
hostGroup
Name of a specific host group for which to see the
LUN mappings. You must put quotation marks (" ")
and brackets ([ ]) around the host group name. The
host group name and quotation marks must be
inside the brackets.
346

Dell PowerVault Specifications

General

RAID Levels	0, 1, 5, 6, 10, 50, 60
RAID Support	Yes
Drive Type	SAS, SSD
Interface	SAS, Fibre Channel, iSCSI
Category	Storage
Connectivity	Ethernet, Fibre Channel
Scalability	Yes
Operating System Compatibility	Windows, Linux, VMware
Management Software	PowerVault Manager, OpenManage