Dell PowerVault User Manual

Parameter Description
the last event entered) are saved to the file. Use
integer values.
forceSave
When set to TRUE, force saves all critical events to
a file. Default value is FALSE.
Save Storage Array iSCSI Statistics
Description
This command saves the iSCSI performance of the storage array to a file. The following statistics are
saved to the file:
• Statistics related to the physical Ethernet port
• Statistics related to the TCP protocol
• Statistics related to the IP protocol
Syntax
save storageArray iscsiStatistics [raw | baseline] file="filename"
Parameters
Parameter Description
raw
This parameter defines that the statistics collected
are all statistics from the RAID controller module
start‑of‑day. Enclose the parameter in square
brackets ([ ]).
baseline
This parameter defines that the statistics collected
are all statistics from the time the RAID controller
modules were reset to zero using the reset
storageArray iscsiStatsBaseline
command. Enclose the parameter in square
brackets ([ ]).
file
The name of the file to which you want to save the
performance statistics. Enclose the file name in
double quotation marks (" ").
NOTE: This command does not automatically
append a file extension to the new file. You
must specify the file extension when you enter
the file name.
NOTE: If you have not reset the iSCSI baseline statistics since the RAID controller module
start‑of‑day, the time at the start‑of‑day is the default baseline time.
264

Dell PowerVault Specifications

General

RAID Levels	0, 1, 5, 6, 10, 50, 60
RAID Support	Yes
Drive Type	SAS, SSD
Interface	SAS, Fibre Channel, iSCSI
Category	Storage
Connectivity	Ethernet, Fibre Channel
Scalability	Yes
Operating System Compatibility	Windows, Linux, VMware
Management Software	PowerVault Manager, OpenManage