Parameters
Parameter Description
asyncRemoteReplicationGroup
The alphanumeric identifier (including - and _) of
the remote replication group on which to run a
consistency check. Enclose the remote replication
group identifier in square brackets ([ ]).
localVirtualDisk
Specifies the alphanumeric identifier of a local
virtual disk that participates in the replication
relationship. You can specify a local virtual disk that
is either the source or the destination on a
replication relationship. Enclose the local virtual
disk identifier in double quotation marks (" ") within
square brackets ([ ]).
file
The file path and the file name to which you want
to save the report that results from the consistency
check. Enclose the file name in double quotation
marks (" "). For example: file="C:\Program Files\CLI
\logs \repoConsistency.txt"
This parameter must appear last, after any of the
optional parameters.
Check Repository Consistency
Description
This command applies to a number of objects that have underlying repository virtual disks. The command
produces a report based on analysis of the data in the repository.
Syntax
check [snapGroup[snapGroupName] repositoryConsistency |
snapVirtualDisk[snapVirtualDiskName] repositoryConsistency |
virtualDisk[virtualDiskName] repositoryConsistency |
virtualDiskCopy target[targetName] repositoryConsistency |
localVirtualDisk="
localVirtualDiskName"]
file="filePath"
Parameters
Parameter Description
repositoryConsistency
Specifies that the snapshot group, snapshot virtual
disk, or virtual disk (depending on which is
specified by the corresponding parameter) is
checked for consistency.
snapGroup
The alphanumeric identifier (including - and _) of
the snapshot group on which to run a consistency
145
To Next Page
Loading...
Need help?
General
