ENSONIQ TS-12 User Manual

Section 3 — MIDI Control Page Parameters TS-12 Musician’s Manual
6
PROG-CHG — Program Changes Range: OFF or ON
This switch controls how the TS-12 handles transmission and reception of MIDI program change
messages.
• OFF—the TS-12 will not transmit or receive MIDI program changes.
• ON—the TS-12 will transmit and receive program changes over MIDI.
• NEW—the TS-12 will transmit program changes only if they are different than the previous
program change sent out on the particular channel. Program changes will be received
normally.
Refer to the Track MIDI parameter description in Section 5 — Preset/Track Parameters and Section
10 — Understanding the Sequencer for more information on how program changes are handled.
Receiving MIDI Program Changes
The way in which the TS-12 receives program changes is slightly more complex than some other
systems, because of the large number of programs and presets that are available to be selected
from MIDI program changes. The following chart shows how the TS-12 receives MIDI program
changes:
In OMNI, POLY and MONO-A modes (puts unit into Sounds/Presets mode):
When… Incoming MIDI Program Changes… Will Select…
BankSet U0 is selected 00-59 User RAM Programs 00-59
BankSet U1 is selected 00-59 User RAM Programs 00-59
BankSet R2 is selected 00-59 ROM Programs 00-59
BankSet R3 is selected 00-59 ROM Programs 00-59
BankSet R4 is selected 00-59 ROM Programs 00-59
BankSet S8 is selected 0-9 Sampled Sounds 0-9
BankSet S9 is selected 0-9 Sampled Sounds 0-9
BankSet U0 is selected 60-119 User RAM Presets 00-59
BankSet U1 is selected 60-119 User RAM Presets 00-59
BankSet R2 is selected 60-119 ROM Presets 00-59
BankSet R3 is selected 60-119 ROM Presets 00-59
BankSet R4 is selected 60-119 ROM Presets 00-59
BankSet S8 is selected 10-127 nothing...
BankSet S9 is selected 10-127 nothing...
In MULTI and MONO-B modes (received on Seq/Song Tracks only):
When… Incoming MIDI Program Changes… Will Select…
Track BANK=000 (BankSet U0) 00-59 (without FX) User RAM Programs 00-59
Track BANK=001 (BankSet U1) 00-59 (without FX) User RAM Programs 00-59
Track BANK=002 (BankSet R2) 00-59 (without FX) ROM Programs 00-59
Track BANK=003 (BankSet R3) 00-59 (without FX) ROM Programs 00-59
Track BANK=004 (BankSet R4) 00-59 (without FX) ROM Programs 00-59
Track BANK=008 (BankSet S8) 0-9 (without FX) Sampled Sounds 0-9
Track BANK=009 (BankSet S9) 0-9 (without FX) Sampled Sounds 0-9
Track BANK=000 (BankSet U0) 60-119 (with FX) User RAM Programs 00-59
Track BANK=001 (BankSet U1) 60-119 (with FX) User RAM Programs 00-59
Track BANK=002 (BankSet R2) 60-119 (with FX) ROM Programs 00-59
Track BANK=003 (BankSet R3) 60-119 (with FX) ROM Programs 00-59
Track BANK=004 (BankSet R4) 60-119 (with FX) ROM Programs 00-59
Track BANK=008 (BankSet S8) 60-69 (with FX) Sampled Sounds 0-9
Track BANK=009 (BankSet S9) 60-69 (with FX) Sampled Sounds 0-9
Note: Incoming MIDI Bank Select messages 0 thru 9 will select BankSets 0 thru 9, changing which
Programs will be selected by incoming MIDI Program Changes. In all cases Program Change
numbers above 120 to 127 are ignored.

ENSONIQ TS-12 Specifications

General

Brand	ENSONIQ
Model	TS-12
Category	Synthesizer
Language	English