GE Versana Balance User Manual

Completing the setup
Versana Balance – Basic Service Manual System view 3-21
5808768-100 English Rev.9
3-6-4 Electrical specifications
3-6-4-1 Verification of the system’s voltage setting
Verify that the mains voltage specified for the Versana Balance
is available on-site.
Refer to the latest revision of the Basic User Manual for a full list
of product labels prior to serving the system.
3-6-4-2 Electrical specifications for Versana Balance
In the table below, the electrical specifications for Versana
Balance includes monitor and on board peripherals.
WARNING
Connecting a Versana Balance to the wrong voltage level will
most likely destroy it.
Table 3-8: Electrical specifications for Versana Balance
Model Name Voltage Tolerances
Power
consumption
Frequency
Versana Balance VA
100-240V ±10% Max.350VA 50/60 Hz
Versana Balance VS

GE Versana Balance Specifications

General

Category	Ultrasound System
Doppler Modes	Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
Power Requirements	100-240 V AC, 50/60 Hz
DICOM Compatibility	Yes
Wireless Connectivity	Optional
Display	LED
Transducers	convex, linear, phased array
Image Storage	USB
Connectivity	USB, HDMI, Ethernet, DICOM
Applications	Obstetrics, Gynecology, Cardiology, Vascular, Urology
Imaging Modes	2D, M-Mode, 3D/4D
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to +60°C
Humidity Range	20% to 80% (non-condensing)
Display Size	15.6 inches
Transducer Ports	3 active transducer ports